aileenlin@sdlingkegroup.com
8619105363026
enEnglish
Category
Product Introduction

 

The wheel tractor is engineered for drawbar agricultural tillage, commercial land shaping, and municipal haulage. Built around a rigid modular chassis and high-torque turbocharged diesel powerplants, these machines maintain continuous traction under severe soil resistance and adverse climatic conditions.


Designed specifically for regional agricultural equipment distributors, farm estate managers, and equipment rental fleets, this machine bridges the critical gap between tractive force and precision hydraulic control. Every unit is manufactured within our primary production facility, utilizing automated CNC machining centers and rigorous dimensional quality audits prior to crating and export dispatch.

 

 
First 1234 Last
 
Key Features & Technical Advantages
70HP 4WD Farm Tractor With Cab
100HP 4WD Tractor
110HP Agricultural Tractor
60HP 4WD Customizable Tractor

Torque Powerplant: Equipped with diesel engines featuring high displacement and a 32 to 35 percent torque reserve, effectively preventing engine lugging and stalling when encountering sudden soil density spikes during deep subsoiling.


Power-Shift Transmission: Utilizes a 16F+16R (or 24F+24R) full-synchronizer or power-shift transmission paired with robust wet clutch packs, enabling seamless gear transitions under full load without tractive interruption.


Hydraulic System: Features a dual-pump open/closed-center hydraulic circuit delivering a regulated flow rate up to 110 Liters per minute, supporting up to 4 auxiliary remote valve pairs for implement actuation.


Planetary Axles: Reinforced front and rear drive axles equipped with limited-slip differentials and planetary gear hub reduction, engineered for a static axle load capacity up to 8.5 metric tons.


Operator Ergonomics & Safety: ROPS and FOPS certified sound-suppressed cabin (internal noise level under or equal to 78 decibels), mechanical suspension seating, adjustable steering column, and integrated climate control engineered to sustain full 10-hour operational shifts.


Standardized PTO Interface: Independent 2-speed rear PTO (540/1000 RPM) featuring multi-disc wet clutch engagement, engineered to handle rotary implements safely and reliably.

 

Applications & Selection Guide
 

Primary Applications

Tillage & Seedbed Prep: Fully compatible with moldboard plows, disc harrows, and subsoilers operating at working depths exceeding 35 centimeters.
Seeding & Fertilization: Delivers the stable ground speed and consistent hydraulic delivery required to operate pneumatic air seeders and fertilizer drills.
Logistical Hauling: Designed for agricultural and industrial trailer towing, backed by dual-line pneumatic or hydraulic trailer braking system integration.
Municipal & Utility Operations: Adaptable for front-end loader attachment, snow-clearing implements, and roadside vegetation maintenance.

Model Selection Matrix

Model

Rated Power (HP / kW)

Drive Type

Transmission Type

Rated Lift Capacity

Primary Application Focus

Model 1604

160 HP (118 kW)

4WD

16F+16R Synchromesh

38 kN

Medium-to-large farm tillage & transport

Model 2204

220 HP (162 kW)

4WD

24F+24R Power Shift

45 kN

Commercial farming & implement pulling

Model 2604

260 HP (191 kW)

4WD

Full Power-Shift

52 kN

Subsoiling, contracting & large acreage operations

 

Manufacturing & Quality Control
 
50HP 4WD Tractor For Sri Lankan Farms

Manufacturing Process & Facilities

  • Chassis Machining: Main structural frames and axle housings are precision-machined on Floor-type Boring and Milling CNC Centers in a single clamping setup, guaranteeing parallelism and alignment tolerances within 0.02 millimeters.
  • Gear Hobbing & Heat Treatment: Transmission gears are forged from 20CrMnTi alloy steel, then carburized and quenched in automated multi-purpose vacuum heat treatment furnaces to achieve a consistent surface hardness of HRC 58 to 62.
  • Anti-Corrosion Surface Treatment: Sheet metal and structural components undergo a rigorous 9-stage pre-treatment (alkaline degreasing, zinc phosphating, and electrophoretic deposition / E-coat) followed by electrostatic powder painting, successfully passing a 1000-hour neutral salt spray test.


Quality Inspection Protocols

  • CMM Dimensional Inspection: Coordinate Measuring Machines verify critical gear teeth, housing dimensions, and machining tolerances prior to transmission sub-assembly.
  • Hydraulic Test Benches: 100 percent of hydraulic pumps, directional control valves, and assembled valve blocks undergo automated pressure decay and flow verification testing at operating temperatures up to 80 degrees Celsius.
  • End-of-Line Dynamometer Testing: Every completed tractor undergoes a mandatory 2.5-hour chassis dynamometer test under simulated variable loads to log engine output curves, transmission noise signatures, and hydraulic pressure stability.

 

OEM & Customization

 

We support global brand owners, regional equipment distributors, and municipal fleet operators with comprehensive engineering modification capabilities:


Powertrain & Emission Compliance: Engine calibration options configured to comply with regional emission mandates, including EPA Tier 4 Final, Euro Stage V, or non-regulated export territories.


Hydraulic & Electrical Customization: Tailored auxiliary hydraulic remote configurations, ISO 11786 implement signal harness integration, and cold-weather starting packages (rated down to -35 degrees Celsius).


Private Labeling & Aesthetics: Custom sheet metal color matching, corporate logo integration on front grilles and interior panels, localized operator manuals, and tailored spare parts catalogs.


Tire & Ballasting Options: Factory-installed agricultural radial tires, turf-compatible options, dual-wheel configurations, and modular cast-iron front and rear wheel ballasts.

60HP 4WD Customizable Tractor

 

Why Choose Our Products
 
70HP 4WD Farm Tractor With Cab suppliers
 

Direct Factory Cost Structure

In-house manufacturing of core mechanical assemblies—including drive axles, gearboxes, and chassis frames—eliminates intermediary markups and stabilizes long-term supply pricing.

 

Traceable Material Certification

Raw structural steel plates, casting batches, and high-strength fasteners are sourced exclusively from certified tier-1 mills, with complete Material Test Reports (MTRs) archived for every production batch.

110HP Agricultural Tractor
100HP 4WD Tractor
 

Global Regulatory Compliance

Tractors are manufactured under strict quality frameworks and hold formal ISO9001 and CE official test reports, facilitating rapid customs clearance and local registration in destination markets.

 

Robust Spare Parts Logistics

A centralized distribution warehouse maintains an active inventory of over 12,000 active SKU lines, guaranteeing immediate dispatch of fast-moving maintenance components and transmission replacements within 48 hours.

60HP 4WD Customizable Tractor suppliers

 

 

Frequently Asked Questions

 

Q: What is the standard warranty coverage, and what components does it include?

A: We provide a standard factory warranty of 12 months or 1,500 operational hours (whichever occurs first) from the bill of lading issuance date. This covers manufacturing defects across core powertrain assemblies, including the engine block, transmission housing, front and rear drive axles, and hydraulic pumps. Extended warranty agreements can be structured during commercial contract negotiations.

Q: What engine emission standards do these tractors comply with?

A: Our standard baseline export models comply with Euro II / III requirements. For highly regulated jurisdictions such as North America and the European Union, we supply fully integrated engine configurations certified to EPA Tier 4 Final and Euro Stage V standards utilizing advanced DOC+DPF+SCR aftertreatment systems.

Q: Can these tractors be supplied in CKD (Completely Knocked Down) or SKD format?

A: Yes. We regularly supply tractors in CKD and SKD formats packed securely inside steel-framed containers. This service assists overseas distribution partners in mitigating import tariff barriers and establishing efficient local assembly lines. Comprehensive technical assembly manuals, specialized tooling lists, and on-site engineering supervision can be arranged.

Q: What is the typical lead time for standard versus customized orders?

A: For standard production-line tractor configurations, order lead time typically ranges from 35 to 45 days from receipt of the initial deposit. For customized OEM orders involving specific color schemes, non-standard hydraulic valve layouts, or specialized tire packages, lead time ranges from 50 to 60 days.

Q: What spare parts support is established for regional distributors?

A: We require and actively assist our regional channel partners in configuring an initial critical spare parts inventory based on active machine population ratios (typically recommended at 5 to 8 percent of total equipment value). Replenishment orders are processed via priority air or sea freight directly from our central parts hub.

Q: How is quality consistency ensured for bulk container shipments?

A: Every machine undergoes a strict final inspection checklist, encompassing dynamic test-track trials and thorough fluid leak verifications. Tractors are securely blocked, steel-chained, and moisture-protected inside 40-foot High Cube (40HC) containers or flat-rack units to prevent transit damage, with comprehensive pre-shipment photo and video inspection reports issued prior to container sealing.

As one of the most professional wheel tractor manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to buy cheap wheel tractor for sale here from our factory. We also accept customized orders.

4WD Small Farm Garden Greenhouse Tractor, 30HP mini tractor, 50 hp utility tractor
Product Recommended
Send Inquiry
Send Inquiry